NovaStar VX400 All-in-One LED Video Processor

Features of the NovaStar VX400 LED Video Processor:

Input connectors
– 1x HDMI 1.3 (IN & LOOP)
– 1x HDMI 1.3
– 1x DVI (IN & LOOP)
– 1x 3G SDI (IN & LOOP)
– 1x optical fiber port (OPT1)

Output connectors
– 4x Gigabit Ethernet ports
A single device unit drives up to 2.6 million
pixels, with a maximum width of 10,240
pixels and a maximum height of 8192 pixels.

– 2x Fiber outputs
OPT 1 copies the output on 4 Ethernet ports.
OPT 2 copies or backs up the output on 4
Ethernet ports.

– 1x HDMI 1.3
For monitoring or video output

Self adaptive OPT 1 for either video input or
sending card output
Thanks to the selfadaptive design, OPT 1 can
be used as either an input or output connector,
depending on its connected device.

Audio input and output
– Audio input accompanied with HDMI input
source
– Audio output via a multi function card
– Output volume adjustment supported

Low latency
Reduce the delay from the input to receiving
card to 20 lines when the low latency function
and Bypass mode are both enabled.

2x layers
– Adjustable layer size and position
– Adjustable layer priority

Output synchronization
An internal input source can be used as the sync
source to ensure the output images of all
cascaded units in sync.

Powerful video processing
– Based on SuperView III image quality
processing technologies to provide stepless
output scaling
– One click full screen display
– Free input cropping

Automatic screen brightness adjustment
Adjust the screen brightness automatically
based on the ambient brightness collected by
the external light sensor.

Easy preset saving and loading
Up to 10 userdefined presets supported

Multiple kinds of hot backup
– Backup between devices
– Backup between Ethernet ports

Mosaic input source supported
The mosaic source is composed of two sources
(2K—1K@60Hz) accessed to the OPT 1.

Up to 4 units cascaded for image mosaic

Three working modes
– Video Controller
– Fiber Converter
– Bypass

All round color adjustment
Input source and LED screen color adjustment
supported, including brightness, contrast,
saturation, hue and Gamma

Pixel level brightness and chroma calibration
Work with NovaLCT and NovaStar calibration
software to support brightness and chroma
calibration on each LED, effectively removing
color discrepancies and greatly improving LED
display brightness and chroma consistency,
allowing for better image quality.

Multiple operation modes
Control the device as you wish via VCan,
NovaLCT or device front panel knob and
buttons.

Specifications:

• Product Type ¼š Video Controller
• Inputs ¼ 2x HDMI (IN+LOOP), DVI (IN+LOOP), 3G-SDI
• Outputs ¼ Ethernet port — 4
• Scaling: Yes, auto-fit
• Loading Capacity: 2.6 million pixels
• Video Loopï ¼ HDMI LOOP, DVI LOOP, SDI LOOP
• Video Monitor: HDMI OUT
• Communication Mode ¼ USB/LAN
• Image Mosaic ¼ Supported
• Crop Settings ¼ Supported
• PIP ¼ Supported
• Power ¼ Auto-Switching UL-listed power supply