Shure P3TR112GR-G20 PSM300 Monitor System with SE112-GR Earphones
Shure P3TR112GR-J13 PSM300 Monitor System with SE112-GR Earphones
Shure P3TR112GR-H20 PSM300 Monitor System with SE112-GR Earphones
Shure P3TR112GR-H20 PSM300 Monitor System features an audio reference compander that ensures a clearer sound and provides lower noise and audio that have no artifacts. The wireless coverage range extends to over 300′ and the system helps eliminate dropouts.
$1,019.00
Available on backorder
Features of the Shure P3TR112GR-H20 PSM300 Monitor System with SE112-GR Earphones:
Specifications:
Performance
Frequency Range H20: 518-542 MHz
RF Output Power 10, 20, 30 mW
Note: varies by region
RF Output Impedance 50 Ohms (typical)
Transmission Range 300′ (90 m)
Audio Input
Connector Type 1/4″ TRS (6.35 mm)
Polarity Tip positive with respect to ring
Configuration Electronically balanced
Impedance 40 kOhms (actual)
Nominal Input Level Switchable, +4 dBu, -10 dBV
Maximum Input Level +4 dBu: +22 dBu
-10 dBV: +12.2 dBu
Pin Assignments Tip=hot, Ring=cold, Sleeve=ground
Phantom Power Protection Up to 60 VDC
Audio Output
Connector Types 1/4″ TRS (6.35 mm)
Configuration Electronically balanced
Impedance Connected directly to inputs
General
Antenna 1/4 wave, detachable
Power Requirement 12 to 15 VDC, 260 mA maximum
Dimensions 1.7 x 7.8 x 6.8″ (43 x 198 x 172 mm)
Net Weight 27.6 oz (783 g)
Packaging Info
Package Weight 6.155 lb
Box Dimensions (LxWxH) 18.3 x 14.9 x 3.8″
Shure P3R-H20 Wireless Bodypack Receiver for PSM300 (H20: 518-541 MHz) Specs
RF Sensitivity Active: 2.2 μV (at 20 dB SINAD)
Image Rejection >90 dB
Adjacent Channel Rejection >60 dB
Intermodulation Attenuation >50 dB
Blocking >60 dB
Audio Output Power 1 kHz @ <1% distortion, Peak Power, @32 ohms: 80 mW (per output)
Minimum Load Impedance 16 ohms
Headphone Output 1/8" (3.5 mm) stereo
Battery Life 5-7 hours (continuous use) AA batteries
Dimensions 4.3 x 2.5 x 0.8" (110 × 64 × 21 mm)
Weight 3.5 oz (98 g) without batteries
Packaging Info
Package Weight 0.85 lb
Box Dimensions (LxWxH) 11.1 x 5.3 x 3.3"
Shure SE112 Sound Isolating Earphones (Gray) Specs
Type Single dynamic MicroDriver
Sensitivity 108 dB SPL/mW
Frequency Range 25 Hz to 17 kHz
Cable Length 50" (127 cm)
Brand
1 review for Shure P3TR112GR-H20 PSM300 Monitor System with SE112-GR Earphones
Related products
-
Shure SM137-LC Cardioid Condenser Microphone with Pouch
Rated 5.00 out of 5Features of the Shure SM137-LC Cardioid Condenser$269.00 -
Shure BETA58A Handheld Dynamic Microphone – Super-Cardioid
Rated 5.00 out of 5Features of the Shure BETA58A Handheld Dynamic Mic$229.00 -
Shure VP89M Medium Condenser Mic with Case
Rated 5.00 out of 5Features of the Shure VP89M Medium Shotgun Condens$1,339.00
Chris Black –
Great product