NovaStar NovaPro UHD All-in-One LED display controller
$15,399.00
Features of the NovaStar NovaPro UHD LED display controller:
- A variety of input connectors
- 4 — 12G-SDI connectors with loop-through
- 1 — HDMI 2.0 connector with loop-through
- 1 — DP 1.2 connector
- 1 — replaceable input card
Input card can be DVI or HDMI (default) card. - 16 — Neutrik Ethernet ports and 4 — OPT ports
- The loading capacity can be up to 8.8 million pixels
- 4 — 10G OPT outputs with copy and hot backup modes
- 6 — layers, 1 — OSD, 1 — LOGO, and 1 — BKG
- 2 — layers up to 4K—2K, 4 — layers up to 2K—1K
Layer scaling supported - OSD supports 4K—2K resolution, cropping, opacity, dynamic or static images and position
settings. - Layer opacity adjustment, irregular layers, layer mask, and layer copying, mirroring and flipping supported
- Layer priority adjustment by z-order
- Up to 8K output width or height of a single device
- Multiviewer settings
Monitor the input sources, PVW, PGM, or perform mixed monitoring. - Quick and advanced screen configurations
- With the built-in smart platform Master VI, LED screen configuration and layer configuration canbe easily performed using the connected mouse, keyboard and monitor.
- 10-bit processing of the input source
- HDR function to make images finer and smoother (NovaStar A8s or A10s Plus receiving card required)
- Low latency output
The delay from the input source to receiving card can be as low as 1 frame when the lowlatency and synchronization functions are turned on and the data runs vertically on the screen.
Specifications:
| Input | ||
| Connector | Quantity | Description |
| 12G-SDI | 4 | Supports ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G) and |
| ST-292 (HD) standard video inputs. | ||
| Input resolutions up to 4K—2K@60Hz and downward compatible Supports 12G-SDI output with loop-through. | ||
| Note: | ||
| When the input source is a 12G-SDI signal, you must use CANARE / L-4.5CHD+ / UHDTV-SDI SDI cables and the cable length should be less than 50 m. | ||
| 12G-SDI connectors 1, 2 and 3 DO NOT support the deinterlaced function, but connector 4 supports the function. | ||
| DP 1.2 | 1 | Input resolutions up to 4K—2K@60Hz (8K—1K@60Hz) and downward compatible |
| Supports HDCP 1.3. | ||
| DOES NOT support interlaced signal inputs. | ||
| HDMI 2.0 | 1 | Input resolutions up to 4K—2K@60Hz (8K—1K@60Hz) and downward compatible |
| Supports HDCP 1.4 and HDCP 2.2. | ||
| DOES NOT support interlaced signal inputs. Supports HDMI 2.0 output with loop-through. | ||
| HDMI 1.3 | 4 | D_4—HDMI 1.3 input card by default |
| Input resolutions up to 1920—1080@60Hz Supports HDCP 1.3. | ||
| Supports interlaced signal inputs. | ||
| The HDMI input card can be replaced by a D_4—DVI input card. | ||
| Output | ||
| Connector | Quantity | Description |
| Ethernet port | 16 | Gigabit Ethernet output ports |
| Maximum loading capacity: 8.8 million pixels | ||
| Maximum width: 8192 pixels | ||
| Maximum height: 8192 pixels | ||
| OPT 14 | 4 | 10G fiber optical output ports (copy and hot backup) |
| OPT 1 transmits data on Ethernet ports 18. | ||
| OPT 2 transmits data on Ethernet ports 916. | ||
| OPT 3 is the copy/hot backup channel for OPT 1. | ||
| OPT 4 is the copy/hot backup channel for OPT 2. | ||
| MVR | 1 | HDMI 1.3 connector |
| A Multiviewer connector to monitor the input source, PVM, PGM or perform mixed monitoring | ||
| AUX | 1 | HDMI 1.3 connector |
| An auxiliary output connector for connecting an auxiliary device, such as a teleprompter | ||
| Control | ||
| Connector | Quantity | Description |
| ETHERNET | 1 | For PC communication or network connection |
| USB | 3 | 1 — USB (Type-B): Connect to the PC for device debugging. |
| 2 — USB (Type-A): | ||
| Insert a USB drive to perform system update. | ||
| Connect a mouse or keyboard. | ||
| Output connector for device cascading | ||
| GENLOCK IN-LOOP | 1 | Connect a synchronization signal source to synchronize the cascaded devices. |
| CONTROL UI | 1 | Connect to a monitor for displaying the user interface of the embedded Master VI software. |
Brand
NovaStar Tech
Novastar Tech was founded in 2008 by a group of LED display industry veterans who had previously worked at leading companies in the industry. They saw an opportunity to develop high-quality LED display control systems that would be more advanced and reliable than existing products. In the early years, Novastar Tech focused on developing LED display controllers and processors that could support high-resolution displays and advanced features such as HDR technology. They also developed advanced calibration and correction tools that helped to improve the accuracy and consistency of LED displays.
As the company grew, they expanded their product line to include LED receiving cards and related software. They also developed a global network of distributors and service centers, which allowed them to provide timely and responsive support to customers around the world.
Today, Novastar Tech is recognized as one of the leading companies in the LED display control industry. They continue to innovate and develop new products, and their technology is used in a wide range of applications, including large-scale outdoor displays, indoor displays, digital signage, and live events.
GTR Direct is a proud dealer for NovaStar Tech Canada
The NovaPro UHD is a new all-in-one controller developed by NovaStar. Featuring video processing and control, and the built-in Master VI platform software, the NovaPro UHD allows you to easily manage layers and configure screens by using a mouse, keyboard and monitor.
Additional information
Features of the NovaStar NovaPro UHD LED display controller:
- A variety of input connectors
- 4 — 12G-SDI connectors with loop-through
- 1 — HDMI 2.0 connector with loop-through
- 1 — DP 1.2 connector
- 1 — replaceable input card
Input card can be DVI or HDMI (default) card. - 16 — Neutrik Ethernet ports and 4 — OPT ports
- The loading capacity can be up to 8.8 million pixels
- 4 — 10G OPT outputs with copy and hot backup modes
- 6 — layers, 1 — OSD, 1 — LOGO, and 1 — BKG
- 2 — layers up to 4K—2K, 4 — layers up to 2K—1K
Layer scaling supported - OSD supports 4K—2K resolution, cropping, opacity, dynamic or static images and position
settings. - Layer opacity adjustment, irregular layers, layer mask, and layer copying, mirroring and flipping supported
- Layer priority adjustment by z-order
- Up to 8K output width or height of a single device
- Multiviewer settings
Monitor the input sources, PVW, PGM, or perform mixed monitoring. - Quick and advanced screen configurations
- With the built-in smart platform Master VI, LED screen configuration and layer configuration canbe easily performed using the connected mouse, keyboard and monitor.
- 10-bit processing of the input source
- HDR function to make images finer and smoother (NovaStar A8s or A10s Plus receiving card required)
- Low latency output
The delay from the input source to receiving card can be as low as 1 frame when the lowlatency and synchronization functions are turned on and the data runs vertically on the screen.
Specifications:
| Input | ||
| Connector | Quantity | Description |
| 12G-SDI | 4 | Supports ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G) and |
| ST-292 (HD) standard video inputs. | ||
| Input resolutions up to 4K—2K@60Hz and downward compatible Supports 12G-SDI output with loop-through. | ||
| Note: | ||
| When the input source is a 12G-SDI signal, you must use CANARE / L-4.5CHD+ / UHDTV-SDI SDI cables and the cable length should be less than 50 m. | ||
| 12G-SDI connectors 1, 2 and 3 DO NOT support the deinterlaced function, but connector 4 supports the function. | ||
| DP 1.2 | 1 | Input resolutions up to 4K—2K@60Hz (8K—1K@60Hz) and downward compatible |
| Supports HDCP 1.3. | ||
| DOES NOT support interlaced signal inputs. | ||
| HDMI 2.0 | 1 | Input resolutions up to 4K—2K@60Hz (8K—1K@60Hz) and downward compatible |
| Supports HDCP 1.4 and HDCP 2.2. | ||
| DOES NOT support interlaced signal inputs. Supports HDMI 2.0 output with loop-through. | ||
| HDMI 1.3 | 4 | D_4—HDMI 1.3 input card by default |
| Input resolutions up to 1920—1080@60Hz Supports HDCP 1.3. | ||
| Supports interlaced signal inputs. | ||
| The HDMI input card can be replaced by a D_4—DVI input card. | ||
| Output | ||
| Connector | Quantity | Description |
| Ethernet port | 16 | Gigabit Ethernet output ports |
| Maximum loading capacity: 8.8 million pixels | ||
| Maximum width: 8192 pixels | ||
| Maximum height: 8192 pixels | ||
| OPT 14 | 4 | 10G fiber optical output ports (copy and hot backup) |
| OPT 1 transmits data on Ethernet ports 18. | ||
| OPT 2 transmits data on Ethernet ports 916. | ||
| OPT 3 is the copy/hot backup channel for OPT 1. | ||
| OPT 4 is the copy/hot backup channel for OPT 2. | ||
| MVR | 1 | HDMI 1.3 connector |
| A Multiviewer connector to monitor the input source, PVM, PGM or perform mixed monitoring | ||
| AUX | 1 | HDMI 1.3 connector |
| An auxiliary output connector for connecting an auxiliary device, such as a teleprompter | ||
| Control | ||
| Connector | Quantity | Description |
| ETHERNET | 1 | For PC communication or network connection |
| USB | 3 | 1 — USB (Type-B): Connect to the PC for device debugging. |
| 2 — USB (Type-A): | ||
| Insert a USB drive to perform system update. | ||
| Connect a mouse or keyboard. | ||
| Output connector for device cascading | ||
| GENLOCK IN-LOOP | 1 | Connect a synchronization signal source to synchronize the cascaded devices. |
| CONTROL UI | 1 | Connect to a monitor for displaying the user interface of the embedded Master VI software. |
Related products
- Features of the NovaStar MCTRL4K LED Display Contr
$7,448.00
- Features of the NovaStar VX400 LED Video Processor
$1,780.00
- Features of the NovaStar VX1000 LED Controller:
$3,277.00
- Specifications: • Pixel Pitch: 4.81mm (0.19â€
$2,279.00
Reviews
There are no reviews yet.
EXPAND YOUR PROWESS WITH OUR AUDIO & VIDEO TECH BLOG
Reviews
There are no reviews yet.