Shure AXT630US Antenna Distribution System for Axient and UHF-R Systems
Shure AXT630US Antenna Distribution System capable of handling high signals without distortion, even in the most inconvenient RF environments. This unit sports selectable 60 MHz input filters to match with the available bands from Axient transmitters, thus offering protection against out-of-band signals and ensuring a low overall RF noise floor.
Features of the Shure AXT630US Antenna Distribution System for Axient and UHF-R Systems:
- For Use with Axient Receivers
- For Clean Signal in Bad RF Environments
- Protects Against Out-of-Band Signals
- Handles High Levels without Distortion
- 4 Pairs of BNC Antenna Outputs
- Unfiltered RF Cascade Ports
- Selectable 60 MHz Filters
- Networkable over Ethernet
- Daisy-Chain AC Power over IEC I/O
- Multiple Included Cables & Accessories
Specifications:
RF Input Specs
Connectors BNC, Unbalanced, Active
Bands Wideband: 470 to 698 MHz
G1: 470 to 530 MHz
H4: 518 to 578 MHz
J5: 578 to 638 MHz
L3: 638 to 698 MHz
Impedance 50 Ohms
Bias Voltage 12 VDC, 150 mA (300 mA Maximum)
Output
Connector Type 8 x BNC (4 Pairs)
Configuration Unbalanced, Active
Impedance 50 Ohms
Gain Adjustment Range Cascade Enabled: -15 to 0 dB (in 1 dB Steps)
Cascade Disabled: -12 to +3 dB (in 1 dB Steps)
Output Intercept Point >25 dBm, Typical
Cascade Output
Connector Type 2 x BNC
Configuration Unbalanced, Wideband
Impedance 50 Ohms
Insertion Loss <5 dB
Physical
Power Requirements 100 to 240 VAC, 50 to 60 Hz
Current Drain 1.0 A RMS (Referenced at 120 VAC)
Operating Temperature Range 0 to 145°F / -18 to 63°C
Storage Temperature Range -20 to 165°F / -29 to 74°C
Dimensions 1.7 x 19.0 x 14.4″ / 44 x 483 x 366 mm
Weight 10.1 lb / 4.6 kg
1 review for Shure AXT630US Antenna Distribution System for Axient and UHF-R Systems
EXPAND YOUR PROWESS WITH OUR AUDIO & VISUAL TECH BLOG
Chris Black –
Good product