Shure KSM32/CG Cardioid Condenser Microphone

Features of the Shure KSM32/CG Cardioid Condenser Microphone:

• For Voice, Instruments, Drums & Cabs
• Cardioid Pattern Lessens Room Noise
• Switchable -15 dB Pad Hinders Distortion
• Low-Cut Filter at 80 or 115 Hz
• Shockmount Inhibits Vibration Noise
• Large-Diaphragm True Condenser Capsule
• Neutral Tone, Quiet Class-A Circuitry
• Integral Pop Protection & Shock-Mounting
• XLR Output for Hookup to Mic Preamp
• Operates on 48V Phantom Power

Specifications:

Microphone
Primary Applications Live Sound, Studio Recording
Form Factor Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources Vocals, Acoustic Guitar, Acoustic Bass, Piano, Drums, Percussion, Overhead, Brass, Woodwinds, Room Ambiance
Sound Field Mono
Operating Principle Pressure Gradient
Capsule 1 x Condenser
Polar Pattern Cardioid
Orientation Side Address
Circuitry Solid-State
Pad -15 dB
High-Pass Filter 80 Hz, 18 dB/Octave
115 Hz, 6 dB/Octave
Tone Adjustment None
Gain Adjustment None
Indicators None
On-Board Controls High-Pass Filter, Pad
Windscreen Built-In
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 154 dB SPL (2.5-Kilohms Load, with Pad)
139 dB SPL (2.5-Kilohms Load)
148 dB SPL (1-Kilohm Load, with Pad)
133 dB SPL (1-Kilohm Load)
Impedance 150 Ohms
Sensitivity -36 dBV/Pa at 1 kHz (Open Circuit Voltage)
Output Level 9 dBV (Max)
Dynamic Range 126 dB (1 kHz, 2.5-Kilohms Load)
119 dB (1 kHz, 1-Kilohm Load)
Signal-to-Noise Ratio 81 dB A-Weighted
Equivalent Noise Level 13 dB A-Weighted
THD < 0.08%
CMRR 50 dB
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)
Headphone Connector None
Power
Bus Power None
Operating Voltage 11 to 52 V (Phantom Power)
Operating Current Consumption 4.7 mA
Physical
Color Gray
Mounting Mic Clip/Stand Adapter (Included)
Included Case Zipper Pouch
Included Filters None
Dimensions ø: 2.2 x L: 7.37″ / ø: 5.6 x L: 18.72 cm
Weight 17.3 oz / 490.46 g

Weight 9.9 oz / 280 g