Shure MX183 Omni Lavalier Mic features Shure’s interchangeable condensor cartridge. Includes Belt-Clip Preamp, Rotatable Tie Clip, Dual Tie Clip, and Snap-Fit Windscreen.
Features of the Shure MX183 Omni Lavalier Mic with Preamp & Accessories:
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges that provide an optimal choice for each application
- Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
- Supplied snap-fit foam windscreen that controls breath noise and stays on securely
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Supplied dual tie clip holds two microphones for dual miking applications
Specifications:
Type: Condenser (electret bias)
Frequency Response: 50 to 17,000 Hz
Polar Pattern: Omnidirectional
Output Impedance: EIA rated at 150 ohms (180 ohms actual)
Open Circuit Sensitivity (at 1 kHz, ref. 1V/Pascal*): -27.5 dB (42.2 mV); All settings -12 dB at 0 gain *1 Pascal = 94 dB SPL
Max SPL (1kHz at 1%THD, 1 k ohm load): 116.7 dB; All settings +6 dB at 0 gain
Equivalent Output Noise (A-weighted): 20.5 dB
Signal to Noise Ratio (referenced at 94 dB SPL):73.5 dB
Dynamic Range at 1 k ohm load: 96.2 dB; 100 dB at 0 gain
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Common Mode Rejection: 45.0 dB minimum
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
Environmental Conditions: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F); Storage Temperature Range: -29 to 74 degrees C (-20 to 165 degrees F)
Cable: Shielded 1.2 meter (4 ft.) cable terminated with a 4-Pin Female Mini Connector (TA4F)
Dimensions (length x diameter): 3.89 ” x .79″ (99 x 20 mm)
1 review for Shure MX183 Omni Lavalier Mic with Preamp & Accessories
EXPAND YOUR PROWESS WITH OUR AUDIO & VISUAL TECH BLOG
Chris Black –
Great microphone