Shure P3TR112GR-J13 PSM300 Monitor System with SE112-GR Earphones

Features of the Shure P3TR112GR-J13 PSM300 Monitor System with SE112-GR Earphones:

• For Live Stage, Theater
• 24-Bit Digital Audio
• P3T Transmitter
• P3R Receiver
• Includes SE112 In-Ear Monitors
• Over 300′ Coverage Range
• One-Touch Scan and Sync Features

Specifications:

Performance
Frequency Range J13: 566-590 MHz
RF Output Power 10, 20, 30 mW
Note: varies by region
RF Output Impedance 50 Ohms (typical)
Transmission Range 300′ (90 m)
Audio Input
Connector Type 1/4″ TRS (6.35 mm)
Polarity Tip positive with respect to ring
Configuration Electronically balanced
Impedance 40 kOhms (actual)
Nominal Input Level Switchable, +4 dBu, -10 dBV
Maximum Input Level +4 dBu: +22 dBu
-10 dBV: +12.2 dBu
Pin Assignments Tip=hot, Ring=cold, Sleeve=ground
Phantom Power Protection Up to 60 VDC
Audio Output
Connector Types 1/4″ TRS (6.35 mm)
Configuration Electronically balanced
Impedance Connected directly to inputs
General
Antenna 1/4 wave, detachable
Power Requirement 12 to 15 VDC, 260 mA maximum
Dimensions 1.7 x 7.8 x 6.8″ (43 x 198 x 172 mm)
Net Weight 27.6 oz (783 g)
Packaging Info
Package Weight 6.165 lb
Box Dimensions (LxWxH) 19 x 15.2 x 3.8″
Shure P3R-J13 Wireless Bodypack Receiver for PSM300 (J13: 566-590 MHz) Specs
RF Sensitivity Active: 2.2 μV (at 20 dB SINAD)
Image Rejection >90 dB
Adjacent Channel Rejection >60 dB
Intermodulation Attenuation >50 dB
Blocking >60 dB
Audio Output Power 1 kHz @ <1% distortion, Peak Power, @32 ohms: 80 mW (per output)
Minimum Load Impedance 16 ohms
Headphone Output 1/8″ (3.5 mm) stereo
Battery Life 5-7 hours (continuous use) AA batteries
Dimensions 4.3 x 2.5 x 0.8″ (110 × 64 × 21 mm)
Weight 3.5 oz (98 g) without batteries
Packaging Info
Package Weight 0.9 lb
Box Dimensions (LxWxH) 11.1 x 5.3 x 3.1″
Shure SE112 Sound Isolating Earphones (Gray) Specs
Type Single dynamic MicroDriver
Sensitivity 108 dB SPL/mW
Frequency Range 25 Hz to 17 kHz
Cable Length 50″ (127 cm)