10ft DJ Stage Lighting Truss
Portable Crank Up System Lighting Triangle Truss System with 3x 57″ Truss for 5ft 10ft 15ft Wide 10ft Height
15ft Single I Beam DJ Stage Lighting Truss
ProX T-LS32M 15ft Single I Beam DJ Stage Lighting Truss
15 feet Length Side Span Light Duty Truss System
T-Bar goes up to 12FT high. I-Beam Truss can reach 10 to 11Ft high.
To avoid problems a competent person should inspect all rigging hardware, stands and equipment before each use and periodically do a major inspection for signs of wear, abuse, and general adequacy, as well as perform any manufacturer recommended preventive maintenance on schedule. Observe all warnings and usage instructions in the full manual.
- Ensure that the stand is positioned on hard stable surface, in suitable location, on firm ground and clear of overhead obstacles.
- Stabilize legs before lifting the tower or any load.
- When outdoors, secure the tower with braces or cables, in case of wind.
- Check the cable, it should not show damaged or flattened areas nor broken strands.
- Loading on truss and stands should comply with rated weights.
- Lock all the safety mechanisms (safety pins, knobs)
- Loads must be centered & balanced on each lifting unit.
- Safety chains must be installed on each item attached to unit.
- Leave a safety perimeter with a radius 5ft greater than the maximum height of the stands during lifting and lowering of loads.
- During transport, close all the sections and lock the lifting carriage.
- Do not attempt to move the stand when loaded or in extended position.
- Servicing and repairs must be made by qualified persons.
- Telescopic masts must be inspected before each use. Any damaged pieces must be replaced immediately.
- Annual inspection by an authorized technician is suggested.
DJ LIGHTING TRUSS STAND
- 3 Interlocking 5 Foot Sections Of “I” Truss
- 2 Adjustable Height Trileg stands
- 2 T-bar tops
- 200 lbs Capacity Evenly Distributed
- Tubing Diameter: 1 1/2″
- All metal connectors and joints.
1 3/8″ Diameter Trussing.
|Dimensions||58 × 13 × 13 in|
ProX Live Performance Gear
ProX Live Performance Gear makes products that are designed for professionals, by professionals. Our motto is simple; "Quality, without compromise". We believe the highest quality of components met with cutting edge design allows us to achieve our goals at a competitive price point. In 1984 ProX Started by manufacturing flight cases for broadcasting production and touring companies. Now specializing in manufacturing specific DJ controller cases for brands like Pioneer, Yamaha and DiGiCo as well as products like lighting cases, stands, cables, and bags.
All cases use CNC technology, during the manufacturing process, to assure that cases are consistently built with strict specifications and tolerances that are required for the high-quality standards that ProX cases have been known for. ProX Listens to customer feedback and consistently create outstanding solutions for all your needs. The Flip-Ready cases are manufactured in Poland and are handcrafted for quality control and individually tesfad for smooth operation. The Flip-Ready design allows for easy, one person, instead of four, movement from the transport position to operational position with virtually no effort.
GTR Direct is a proud dealer for ProX Canada
Portable Crank Up System Lighting Triangle Truss System with 3x 57″ Truss for 5ft 10ft 15ft Wide 10ft HeightThe ProX T-LS35C is a triangle crank truss system.$725.00