Furman ELITE-20 PFI 20 Amp Conditioner Power HT Power Factor
Available on backorder
Available on backorder
Features of the Furman ELITE-20 PFI 20 Amp Conditioner Power HT Power Factor:
- SMP provides the highest level of protection available
- LiFT significantly reduces AC line noise
- E.V.S. protects equipment from dangerous overvoltage conditions
- Zero ground contamination circuitry protects critical digital components
- Power Factor Technology provides over 55 Amps peak charge surplus current for power-starved amplifiers
- Ultrasonic bi-filtering isolates digital and video circuits from analog components
- Retractable LED lamps illuminate a cabinet or rack full of equipment
- Detachable module for telco surge suppression and 3 pairs of cable / satellite TVSS isolated F-connectors
- 12 Volt triggering for remote control
Specifications:
General
- Family Elite Series
- Line Voltage 120 (Volts)
- Number of Outlets 13
- Number of Isolated Banks 3
- Outlet Descriptions (Ultra-Linearly filtered outlet – front panel)
8 (Ultra-Linearly filtered outlets with additional ultrasonic filtering for either video or audio components, 4 with 12V triggering)
4 (Power Factor Technology amplifier outlets – 4.5 amps RMS reserve – reactive load – over 55 amps peak charge, 2 with 5 second delay via 12V triggering) - Rack Mountable Yes
- Rack Ears Included Yes
- Front Panel Meter(s) No
- Front Media Light(s) 2 Retractable LED lamps
- Control On/Off switch and light dimmer knob on front panel. 12 Volt triggering for remote control.
- Voltage Regulation No
- Compliance NRTL-C
- USB Charging N/A
- Low Voltage Trigger 12V, In/Out
- Dimensions 4″ H x 17″ W x 14.75″ D (Standard 2 RU height without feet)
- Weight 18 lbs
- Power Consumption 12 Watts for display and control circuits independent of actual load
AC Protection
- AC Protection Technology Extreme Voltage Shutdown
Series Multi-Stage Protection
Non-sacrificial protection with zero ground contamination - Under-Voltage Shut off 85V
- Over-Voltage Shut off 140V ±3V
- Maximum Current Rating 20 (Amps)
- Initial Clamping Level 188 VAC peak @ 3,000 Amps
Filtration
- Filtration Technology LiFT
- Filtration Rating Transverse (Differential) Mode:
> 40 dB from 5Khz. – 100 kHz.
>80 dB from – 100 kHz. – 1GHz.Common Mode:
40dB from 10Hz. 30 kHz.
20 from 40 kHz. 1MHz.
(Linear attenuation curve from 0.05 to 100 ohms line impedance) - Signal Line Protection Tel
3 Cable/Satellite
| Weight | 22.9 lbs |
|---|---|
| Dimensions | 21.6 × 19.7 × 8.4 in |
Brand
Furman
Furman Power products are the most trusted in the world by artists, A/V professionals, the recording industry and technology integration firms for premium power conditioning, protection, regulation, sequencing and distribution. Furman Canada has earned its reputation of trust around the world thanks to the billions of dollars of equipment saved from power problems and because of our innovative, leading technologies that maximize an A/V system’s power and performance. For our customers, operating a system without the safe, clean power delivered by a Furman unit is simply out of the question. For fans, we put our mind, heart and soul into every product we build, because that’s what our customers do with their entertainment and systems.
FURMAN IS PART OF THE NORTEK CONTROL FAMILY
Nortek Security & Control LLC is a global leader in smart connected devices and systems for residential and commercial customers, serving the security, access, AI, health & wellness, control and power/AV markets. Nortek Control and its partners have deployed more than 5 million connected systems and over 25 million security and home control sensors and peripherals. Through its family of brands, the company designs solutions for national telecoms, big-box retailers, OEM partners, service providers, dealers, technology integrators and consumers. Headquartered in Carlsbad, Calif., Nortek Control has over 50 years of innovation and is dedicated to addressing the lifestyle and business needs of millions of customers every day.
GTR Direct is a proud dealer for Furman Canada
1 review for Furman ELITE-20 PFI 20 Amp Conditioner Power HT Power Factor
The Furman ELITE-20 PFI 20 Amp Conditioner Power HT Power Factor features remote control capability via 12V triggering, compatible with the 12V triggering devices commonly found in power receivers and pre-amp processors.
Additional information
| Weight | 22.9 lbs |
|---|---|
| Dimensions | 21.6 × 19.7 × 8.4 in |
Features of the Furman ELITE-20 PFI 20 Amp Conditioner Power HT Power Factor:
- SMP provides the highest level of protection available
- LiFT significantly reduces AC line noise
- E.V.S. protects equipment from dangerous overvoltage conditions
- Zero ground contamination circuitry protects critical digital components
- Power Factor Technology provides over 55 Amps peak charge surplus current for power-starved amplifiers
- Ultrasonic bi-filtering isolates digital and video circuits from analog components
- Retractable LED lamps illuminate a cabinet or rack full of equipment
- Detachable module for telco surge suppression and 3 pairs of cable / satellite TVSS isolated F-connectors
- 12 Volt triggering for remote control
Specifications:
General
- Family Elite Series
- Line Voltage 120 (Volts)
- Number of Outlets 13
- Number of Isolated Banks 3
- Outlet Descriptions (Ultra-Linearly filtered outlet – front panel)
8 (Ultra-Linearly filtered outlets with additional ultrasonic filtering for either video or audio components, 4 with 12V triggering)
4 (Power Factor Technology amplifier outlets – 4.5 amps RMS reserve – reactive load – over 55 amps peak charge, 2 with 5 second delay via 12V triggering) - Rack Mountable Yes
- Rack Ears Included Yes
- Front Panel Meter(s) No
- Front Media Light(s) 2 Retractable LED lamps
- Control On/Off switch and light dimmer knob on front panel. 12 Volt triggering for remote control.
- Voltage Regulation No
- Compliance NRTL-C
- USB Charging N/A
- Low Voltage Trigger 12V, In/Out
- Dimensions 4″ H x 17″ W x 14.75″ D (Standard 2 RU height without feet)
- Weight 18 lbs
- Power Consumption 12 Watts for display and control circuits independent of actual load
AC Protection
- AC Protection Technology Extreme Voltage Shutdown
Series Multi-Stage Protection
Non-sacrificial protection with zero ground contamination - Under-Voltage Shut off 85V
- Over-Voltage Shut off 140V ±3V
- Maximum Current Rating 20 (Amps)
- Initial Clamping Level 188 VAC peak @ 3,000 Amps
Filtration
- Filtration Technology LiFT
- Filtration Rating Transverse (Differential) Mode:
> 40 dB from 5Khz. – 100 kHz.
>80 dB from – 100 kHz. – 1GHz.Common Mode:
40dB from 10Hz. 30 kHz.
20 from 40 kHz. 1MHz.
(Linear attenuation curve from 0.05 to 100 ohms line impedance) - Signal Line Protection Tel
3 Cable/Satellite
Related products
$128.00
$278.00
- Features of the QSC CP12 1000W 12in Powered Speake
$929.00
- Features of the QSC E110 10in 300W Passive Speaker
$959.00
1 review for Furman ELITE-20 PFI 20 Amp Conditioner Power HT Power Factor
-
Great product
EXPAND YOUR PROWESS WITH OUR AUDIO & VIDEO TECH BLOG
Chris Black –
Great product