Lab Gruppen LUCIA 60/2 Amplifier
$769.00
Features of the Lab Gruppen LUCIA 60/2 Amplifier
- Compact amplifier which offers full output power across a range of loads with 2 x 30 W into 8, 4 or 2 Ohms
- Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning
- Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac
- Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs
- Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level
- Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter
- Optimized presets available for a wide range of loudspeaker models for fast configuration
- Enhanced Bass Profile for extended LF response with small loudspeakers
- Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load
- Efficient Class-D amplifier with low distortion and minimal heat dissipatio
- Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting
- Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
- Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection
- Universal power supply supports 100 – 240 V AC at 50 or 60 Hz
- Intelligent fan control for silent operation at idle and at lower output levels
- Front panel power and fault indication as well as per-channel signal LED and attenuation knob
- Balanced high quality analog inputs and amplifier outputs on detachable screw terminals
- Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources
- Rackmount kit, pole-mount kit and wall panel kits available as accessories
Specifications
General
| Number of amplifier channels | 2 |
| Max total output all channels driven | 60 W |
| Max output voltage per channel | 21.9 V peak |
| Max output current per channel | 3.9 Arms |
Max output power (all channels driven)
| 2 ohms | 30 W |
| 4 ohms | 30 W |
| 8 ohms | 30 W |
| 16 ohms | 15 W |
Performance
| THD 20 Hz – 20 kHz at 1 W into 8 ohms | <0.3% |
| THD at 1 kHz and 1 dB below clipping | <0.2% |
| Signal to Noise Ratio | >95 dBA |
| Channel separation (Crosstalk) at 1 kHz | >60 dBA |
| Frequency Response | 5 Hz – 22 kHz |
| Input impedance | 10 kOhm |
| Common Mode Rejection (CMR) | 40 dB |
Gain, Sensitivity and Limiters
| VPL for 16 ohm mode | 21.9 V peak |
| VPL for 8 ohm mode | 21.9 V peak |
| VPL for 4 ohm mode | 15.5 Vpeak |
| VPL for 2 ohm mode | 11 Vpeak |
| Sensitivity, balanced input | 4 dBu / 1.23 Vrms |
| Sensitivity, RCA input | -2 dBu / 0.62 Vrms |
| Input headroom for clip, balanced 1 | 12 dBu / 3.09 Vrms |
| Input headroom for clip, RCA 1 | 6 dBu / 1.55 Vrms |
Connectors and Buttons
| Output connectors (per ch.) | 2 – pin detachable screw terminals |
| Input connectors (ch. 1 & 2) | Unbalanced RCA type |
| Input connectors (per ch.) | 3 – pin detachable screw terminals, electronically balanced |
| Line-level output connectors (ch. 3 & 4) | 3 – pin detachable screw terminals, electronically balanced |
| GPO (power state output) 2 | Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off |
| RS232 | Can be controlled and monitored by third parties via RS232 using both the GPI pins |
| USB | For firmware update and configuration with the Application Browser software |
| Level adjustment (per channel) | Front panel potentiometer, detented from -inf to 0 dB |
Processing Features
| Input processing block 3 | 4 EQ sections per input |
| Mix matrix routing block 3 | 2 in – 2 out mix-matrix controllable from GPI |
| Output processing block 3 | 4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation) |
| Latency from any input to any output | User adjustable from 9.15 to 137 ms |
Power
| Nominal voltage | 100 – 240 VAC |
| Operating voltage | 85 – 265 VAC |
| Standby consumption | <1 W |
| Mains connector | IEC inlet |
| Cooling | One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C |
| Auto mode | The power state is controlled automatically by the audio signal |
Dimensions
| Dimensions | W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”) |
Weight
| Weight | 1.9 kg (4.2 lbs) |
Finish
| Finish | Black aluminum front and black steel chassis |
Approvals
| Approvals | CE, CSA, CCC, PSE, FCC, Energy Star |
Brand
Lab Gruppen
Lab Gruppen is a premium brand in the professional audio industry, providing high-quality power amplifiers and associated products for sound reinforcement applications. With over 35 years of experience, Lab Gruppen has established itself as a leading brand in the market, offering advanced audio technology, exceptional sound quality, and reliable performance.
Their products include amplifiers for various applications, including live sound, installations, touring, and recording studios. Lab Gruppen's team of experts works closely with their clients to provide customized solutions that meet their specific needs and budget, ensuring a seamless and successful audio experience.
Lab Gruppen's commitment to quality and customer satisfaction has earned them a reputation for excellence in the industry. They strive to deliver exceptional products and services that exceed their customers' expectations and contribute to the success of every event they serve.
With a strong focus on innovation and technology, Lab Gruppen is constantly pushing the boundaries of what is possible in the professional audio industry. Their products are designed with both performance and efficiency in mind, providing audio professionals with the tools they need to create exceptional sound experiences while minimizing their environmental impact.
GTR Direct is a proud dealer for Lab Gruppen Canada
1 review for Lab Gruppen LUCIA 60/2 Amplifier
The Lab Gruppen LUCIA 60/2 Amplifier Incorporates Ease of Install with 2 X 30 W of Decentralised Power in a Compact, Energy Star Compliant Amplifier. Power, processing, control and I/O are conveniently placed exactly where they are needed.
Additional information
Features of the Lab Gruppen LUCIA 60/2 Amplifier
- Compact amplifier which offers full output power across a range of loads with 2 x 30 W into 8, 4 or 2 Ohms
- Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning
- Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac
- Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs
- Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level
- Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter
- Optimized presets available for a wide range of loudspeaker models for fast configuration
- Enhanced Bass Profile for extended LF response with small loudspeakers
- Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load
- Efficient Class-D amplifier with low distortion and minimal heat dissipatio
- Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting
- Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
- Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection
- Universal power supply supports 100 – 240 V AC at 50 or 60 Hz
- Intelligent fan control for silent operation at idle and at lower output levels
- Front panel power and fault indication as well as per-channel signal LED and attenuation knob
- Balanced high quality analog inputs and amplifier outputs on detachable screw terminals
- Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources
- Rackmount kit, pole-mount kit and wall panel kits available as accessories
Specifications
General
| Number of amplifier channels | 2 |
| Max total output all channels driven | 60 W |
| Max output voltage per channel | 21.9 V peak |
| Max output current per channel | 3.9 Arms |
Max output power (all channels driven)
| 2 ohms | 30 W |
| 4 ohms | 30 W |
| 8 ohms | 30 W |
| 16 ohms | 15 W |
Performance
| THD 20 Hz – 20 kHz at 1 W into 8 ohms | <0.3% |
| THD at 1 kHz and 1 dB below clipping | <0.2% |
| Signal to Noise Ratio | >95 dBA |
| Channel separation (Crosstalk) at 1 kHz | >60 dBA |
| Frequency Response | 5 Hz – 22 kHz |
| Input impedance | 10 kOhm |
| Common Mode Rejection (CMR) | 40 dB |
Gain, Sensitivity and Limiters
| VPL for 16 ohm mode | 21.9 V peak |
| VPL for 8 ohm mode | 21.9 V peak |
| VPL for 4 ohm mode | 15.5 Vpeak |
| VPL for 2 ohm mode | 11 Vpeak |
| Sensitivity, balanced input | 4 dBu / 1.23 Vrms |
| Sensitivity, RCA input | -2 dBu / 0.62 Vrms |
| Input headroom for clip, balanced 1 | 12 dBu / 3.09 Vrms |
| Input headroom for clip, RCA 1 | 6 dBu / 1.55 Vrms |
Connectors and Buttons
| Output connectors (per ch.) | 2 – pin detachable screw terminals |
| Input connectors (ch. 1 & 2) | Unbalanced RCA type |
| Input connectors (per ch.) | 3 – pin detachable screw terminals, electronically balanced |
| Line-level output connectors (ch. 3 & 4) | 3 – pin detachable screw terminals, electronically balanced |
| GPO (power state output) 2 | Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off |
| RS232 | Can be controlled and monitored by third parties via RS232 using both the GPI pins |
| USB | For firmware update and configuration with the Application Browser software |
| Level adjustment (per channel) | Front panel potentiometer, detented from -inf to 0 dB |
Processing Features
| Input processing block 3 | 4 EQ sections per input |
| Mix matrix routing block 3 | 2 in – 2 out mix-matrix controllable from GPI |
| Output processing block 3 | 4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation) |
| Latency from any input to any output | User adjustable from 9.15 to 137 ms |
Power
| Nominal voltage | 100 – 240 VAC |
| Operating voltage | 85 – 265 VAC |
| Standby consumption | <1 W |
| Mains connector | IEC inlet |
| Cooling | One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C |
| Auto mode | The power state is controlled automatically by the audio signal |
Dimensions
| Dimensions | W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”) |
Weight
| Weight | 1.9 kg (4.2 lbs) |
Finish
| Finish | Black aluminum front and black steel chassis |
Approvals
| Approvals | CE, CSA, CCC, PSE, FCC, Energy Star |
Related products
- Features of the QSC CP12 1000W 12in Powered Speake
$929.00
$128.00
- Features of the QSC E112 12in 400W Passive Speaker
$1,199.00
- Features of the QSC GX3 Power Amplifier (300 Watts
$769.00
1 review for Lab Gruppen LUCIA 60/2 Amplifier
-
Good amplifier
EXPAND YOUR PROWESS WITH OUR AUDIO & VIDEO TECH BLOG
Chris Black –
Good amplifier