Turbosound MS215 Bandpass Subwoofer
Features of the Turbosound MS215 Bandpass Subwoofer
- Cardioid-arrayable, vented bandpass dual 15″ subwoofer for touring and installation applications
- 1000 Watts continuous, 4,000 Watts peak power
- 15? neodymium low Frequency transducers
- Ergonomic 4-point suspension system allows rapid deployment in either orientation
- Suspend up to 12 MS215 elements at 10:1 safety factor
- Designed for suspension with MV212 and MV212-XV line array elements in mixed arrays
- Seamless integration with Lab Gruppen amplifiers and Lake DSP for a complete system solution
- Flexible cardioid configurations and electronic delay steering provide superior rear rejection and pattern control
- Optimized tuning for extended low frequency impact and accurate transient response
- Integral runners and recesses combined with suspension system accessories facilitate secure ground stacking
- Integral M20 (3/4″ / 20 mm thread) pole mount socket to support satellite speaker configurations
- 18 mm (3/4″) Baltic birch enclosure with extremely durable semi matte black paint finish
- Tour grade Neutrik SpeakON* STX NL4 rear panel connector for input connection
- Front-mounted NL4 connector for rear-firing cardioid operation
The loudspeaker shall be of the passive subwoofer type, consisting of two 15″ (381 mm) LF drivers. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 40 Hz to 115 Hz and within -10 dB from 35 Hz to 150 Hz. Nominal dispersion shall be “half space.” Maximum amplifier output power shall be 4,000 Watts peak, Peak level at 1 m under half space conditions using IEC 268-5 pink noise with crest factor 4, with dedicated pre-set, shall be 143 dB. Dimensions: 530 mm high x 810 mm wide x 798 mm deep (20.9 x 31.9 x 31.4”). Net weight: 83 kg (183 lbs). The loudspeaker system shall be the TURBOSOUND MS215. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equalled or exceeded.
Brand
Turbosound
TurboSound is known for its innovative loudspeaker designs, which use a range of advanced materials and technologies to deliver high-quality sound. The company has developed a number of proprietary technologies, including its patented Polyhorn technology, which provides high-frequency dispersion and control, and its Dendritic waveguide technology, which enhances mid-range and high-frequency performance. Over the years, TurboSound has developed a wide range of loudspeakers for various applications, including touring, live sound, and installations. Their products are used by a diverse range of customers, from musicians and DJs to sound engineers and event planners.
TurboSound has also developed a reputation for its commitment to quality and reliability. The company uses advanced manufacturing processes and rigorous testing procedures to ensure that its products are built to the highest standards and perform reliably in a range of environments. In addition to its loudspeakers, TurboSound also offers a range of other audio products, including digital signal processors, amplifiers, and accessories. The company is also known for its technical support and customer service, which is provided by a team of experienced engineers and technicians.
GTR Direct is a proud dealer for Turbosound Canada
1 review for Turbosound MS215 Bandpass Subwoofer
The Turbosound MS215 Bandpass Subwoofer is a compact passive dual 15″ 4,000 Watt (peak) that is ideally suited for a broad range of speech and music sound reinforcement applications in both fixed, portable and touring audio systems.
Additional information
Features of the Turbosound MS215 Bandpass Subwoofer
- Cardioid-arrayable, vented bandpass dual 15″ subwoofer for touring and installation applications
- 1000 Watts continuous, 4,000 Watts peak power
- 15? neodymium low Frequency transducers
- Ergonomic 4-point suspension system allows rapid deployment in either orientation
- Suspend up to 12 MS215 elements at 10:1 safety factor
- Designed for suspension with MV212 and MV212-XV line array elements in mixed arrays
- Seamless integration with Lab Gruppen amplifiers and Lake DSP for a complete system solution
- Flexible cardioid configurations and electronic delay steering provide superior rear rejection and pattern control
- Optimized tuning for extended low frequency impact and accurate transient response
- Integral runners and recesses combined with suspension system accessories facilitate secure ground stacking
- Integral M20 (3/4″ / 20 mm thread) pole mount socket to support satellite speaker configurations
- 18 mm (3/4″) Baltic birch enclosure with extremely durable semi matte black paint finish
- Tour grade Neutrik SpeakON* STX NL4 rear panel connector for input connection
- Front-mounted NL4 connector for rear-firing cardioid operation
The loudspeaker shall be of the passive subwoofer type, consisting of two 15″ (381 mm) LF drivers. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 40 Hz to 115 Hz and within -10 dB from 35 Hz to 150 Hz. Nominal dispersion shall be “half space.” Maximum amplifier output power shall be 4,000 Watts peak, Peak level at 1 m under half space conditions using IEC 268-5 pink noise with crest factor 4, with dedicated pre-set, shall be 143 dB. Dimensions: 530 mm high x 810 mm wide x 798 mm deep (20.9 x 31.9 x 31.4”). Net weight: 83 kg (183 lbs). The loudspeaker system shall be the TURBOSOUND MS215. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equalled or exceeded.
Related products
$128.00
$261.00
$145.00
$218.00
1 review for Turbosound MS215 Bandpass Subwoofer
-
Great product
EXPAND YOUR PROWESS WITH OUR AUDIO & VIDEO TECH BLOG
Chris Black –
Great product