Furman ELITE-20 PFI 20 Amp Conditioner Power HT Power Factor
The Furman ELITE-20 PFI 20 Amp Conditioner Power HT Power Factor features remote control capability via 12V triggering, compatible with the 12V triggering devices commonly found in power receivers and pre-amp processors.
$2,550.00
Features of the Furman ELITE-20 PFI 20 Amp Conditioner Power HT Power Factor:
- SMP provides the highest level of protection available
- LiFT significantly reduces AC line noise
- E.V.S. protects equipment from dangerous overvoltage conditions
- Zero ground contamination circuitry protects critical digital components
- Power Factor Technology provides over 55 Amps peak charge surplus current for power-starved amplifiers
- Ultrasonic bi-filtering isolates digital and video circuits from analog components
- Retractable LED lamps illuminate a cabinet or rack full of equipment
- Detachable module for telco surge suppression and 3 pairs of cable / satellite TVSS isolated F-connectors
- 12 Volt triggering for remote control
Specifications:
General
- Family Elite Series
- Line Voltage 120 (Volts)
- Number of Outlets 13
- Number of Isolated Banks 3
- Outlet Descriptions (Ultra-Linearly filtered outlet – front panel)
8 (Ultra-Linearly filtered outlets with additional ultrasonic filtering for either video or audio components, 4 with 12V triggering)
4 (Power Factor Technology amplifier outlets – 4.5 amps RMS reserve – reactive load – over 55 amps peak charge, 2 with 5 second delay via 12V triggering) - Rack Mountable Yes
- Rack Ears Included Yes
- Front Panel Meter(s) No
- Front Media Light(s) 2 Retractable LED lamps
- Control On/Off switch and light dimmer knob on front panel. 12 Volt triggering for remote control.
- Voltage Regulation No
- Compliance NRTL-C
- USB Charging N/A
- Low Voltage Trigger 12V, In/Out
- Dimensions 4″ H x 17″ W x 14.75″ D (Standard 2 RU height without feet)
- Weight 18 lbs
- Power Consumption 12 Watts for display and control circuits independent of actual load
AC Protection
- AC Protection Technology Extreme Voltage Shutdown
Series Multi-Stage Protection
Non-sacrificial protection with zero ground contamination - Under-Voltage Shut off 85V
- Over-Voltage Shut off 140V ±3V
- Maximum Current Rating 20 (Amps)
- Initial Clamping Level 188 VAC peak @ 3,000 Amps
Filtration
- Filtration Technology LiFT
- Filtration Rating Transverse (Differential) Mode:
> 40 dB from 5Khz. – 100 kHz.
>80 dB from – 100 kHz. – 1GHz.Common Mode:
40dB from 10Hz. 30 kHz.
20 from 40 kHz. 1MHz.
(Linear attenuation curve from 0.05 to 100 ohms line impedance) - Signal Line Protection Tel
3 Cable/Satellite
Weight | 22.9 lbs |
---|---|
Dimensions | 21.6 × 19.7 × 8.4 in |
1 review for Furman ELITE-20 PFI 20 Amp Conditioner Power HT Power Factor
EXPAND YOUR PROWESS WITH OUR AUDIO & VISUAL TECH BLOG
Chris Black –
Great product