Lab Gruppen LUCIA 60/2 Amplifier

(1 customer review)

The Lab Gruppen LUCIA 60/2 Amplifier Incorporates Ease of Install with 2 X 30 W of Decentralised Power in a Compact, Energy Star Compliant Amplifier. Power, processing, control and I/O are conveniently placed exactly where they are needed.

$769.00
Lab Gruppen Canada
UPC: 4033653090636UPC: 4033653090636
Tags: Category: SKU: LAB-LUCIA60/2

Features of the Lab Gruppen LUCIA 60/2 Amplifier

  • Compact amplifier which offers full output power across a range of loads with 2 x 30 W into 8, 4 or 2 Ohms
  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning
  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac
  • Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs
  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level
  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter
  • Optimized presets available for a wide range of loudspeaker models for fast configuration
  • Enhanced Bass Profile for extended LF response with small loudspeakers
  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load
  • Efficient Class-D amplifier with low distortion and minimal heat dissipatio
  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting
  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection
  • Universal power supply supports 100 – 240 V AC at 50 or 60 Hz
  • Intelligent fan control for silent operation at idle and at lower output levels
  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob
  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals
  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources
  • Rackmount kit, pole-mount kit and wall panel kits available as accessories
Specifications

General
Number of amplifier channels 2
Max total output all channels driven 60 W
Max output voltage per channel 21.9 V peak
Max output current per channel 3.9 Arms
Max output power (all channels driven)
2 ohms 30 W
4 ohms 30 W
8 ohms 30 W
16 ohms 15 W
Performance
THD 20 Hz – 20 kHz at 1 W into 8 ohms <0.3%
THD at 1 kHz and 1 dB below clipping <0.2%
Signal to Noise Ratio >95 dBA
Channel separation (Crosstalk) at 1 kHz >60 dBA
Frequency Response 5 Hz – 22 kHz
Input impedance 10 kOhm
Common Mode Rejection (CMR) 40 dB
Gain, Sensitivity and Limiters
VPL for 16 ohm mode 21.9 V peak
VPL for 8 ohm mode 21.9 V peak
VPL for 4 ohm mode 15.5 Vpeak
VPL for 2 ohm mode 11 Vpeak
Sensitivity, balanced input 4 dBu / 1.23 Vrms
Sensitivity, RCA input -2 dBu / 0.62 Vrms
Input headroom for clip, balanced 1 12 dBu / 3.09 Vrms
Input headroom for clip, RCA 1 6 dBu / 1.55 Vrms
Connectors and Buttons
Output connectors (per ch.) 2 – pin detachable screw terminals
Input connectors (ch. 1 & 2) Unbalanced RCA type
Input connectors (per ch.) 3 – pin detachable screw terminals, electronically balanced
Line-level output connectors (ch. 3 & 4) 3 – pin detachable screw terminals, electronically balanced
GPO (power state output) 2 Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off
RS232 Can be controlled and monitored by third parties via RS232 using both the GPI pins
USB For firmware update and configuration with the Application Browser software
Level adjustment (per channel) Front panel potentiometer, detented from -inf to 0 dB
Processing Features
Input processing block 3 4 EQ sections per input
Mix matrix routing block 3 2 in – 2 out mix-matrix controllable from GPI
Output processing block 3 4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation)
Latency from any input to any output User adjustable from 9.15 to 137 ms
Power
Nominal voltage 100 – 240 VAC
Operating voltage 85 – 265 VAC
Standby consumption <1 W
Mains connector IEC inlet
Cooling One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C
Auto mode The power state is controlled automatically by the audio signal
Dimensions
Dimensions W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”)
Weight
Weight 1.9 kg (4.2 lbs)
Finish
Finish Black aluminum front and black steel chassis
Approvals
Approvals CE, CSA, CCC, PSE, FCC, Energy Star

 

Brand

Lab Gruppen

Lab Gruppen

 A premium brand in the professional audio industry, providing high-quality power amplifiers and associated products for sound reinforcement applications. With over 35 years of experience, the brand has established itself as a leading brand in the market, offering advanced audio technology, exceptional sound quality, and reliable performance.

Their products include amplifiers for various applications, including live sound, installations, touring, and recording studios. Lab Gruppen's team of experts works closely with their clients to provide customized solutions that meet their specific needs and budget, ensuring a seamless and successful audio experience.

Lab Gruppen's commitment to quality and customer satisfaction has earned them a reputation for excellence in the industry. They strive to deliver exceptional products and services that exceed their customers' expectations and contribute to the success of every event they serve.

With a strong focus on innovation and technology, Lab Gruppen is constantly pushing the boundaries of what is possible in the professional audio industry. Their products are designed with both performance and efficiency in mind, providing audio professionals with the tools they need to create exceptional sound experiences while minimizing their environmental impact.

GTR Direct is a proud dealer for Lab Gruppen Canada
Lab Gruppen Canada

1 review for Lab Gruppen LUCIA 60/2 Amplifier

  1. Chris Black

    Good amplifier

Add a review

Your email address will not be published. Required fields are marked *

EXPAND YOUR PROWESS WITH OUR AUDIO & VISUAL TECH BLOG

This is the title